錦得麗PF系列印花染料 Kingdery PF Printing Series Dyes |
Solubility 溶解度 (g/L) |
色牢度 Fastness | ||||||||||
耐光一氙燈(Xenon)Light SO 105B02 | 耐洗Washing(60°C)SO 105 C06 | 耐汗?jié)n Perspiration iso 105 E04 | 耐摩擦Rubbing ISO 105X12 | Fastness toChlorinatedSo 05E03Water 耐氯水浸牢度 |
||||||||
酸性Acid | 堿性Alkaline | |||||||||||
染料名稱 Name of Dyes
|
色樣(50g/L) Color Sample
|
原樣變化CH | 白布沾色co | 原樣變化CH | 白布沾色co | 原樣變化CH | 白布沾色co | 干 Dry | 濕Wet | |||
嫩黃 PF-6GBrill.Yellow PF-6G | 200 | 5-6 | 4-5 | 4-5 | 5 | 5 | 5 | 4-5 | 4-5 | 4 | 5 | |
金黃PF-GRGolden Yellow PF-GR | 150 | 6 | 5 | 4-5 | 4-5 | 4-5 | 4-5 | 4-5 | 4-5 | 4 | 4-5 | |
金黃PF-2RNGolden Yellow PF-2RN | 200 | 5-6 | 4-5 | 4-5 | 4-5 | 4-5 | 4-5 | 4-5 | 4-5 | 4 | 4 | |
橙PF-RNOrange PF-RN | 200 | 4-5 | 4-5 | 5 | 4-5 | 4-5 | 4-5 | 4-5 | 4-5 | 4 | 4-5 | |
棕PF-2RBrown PF-2R | 200 | 6 | 5 | 5 | 5 | 4-5 | 4-5 | 4-5 | 4-5 | 3-4 | 3-4 | |
棕PF-6RBrown PF-6R | 200 | 6 | 5 | 5 | 5 | 4 | 4 | 4-5 | 5 | 4-5 | 4-5 | |
紅 PF-BNRed PF-BN | 100 | 4 | 4-5 | 5 | 4-5 | 4-5 | 4-5 | 4 | 4-5 | 4 | 3-4 | |
紅PF-4BRed PF-4B | 200 | 4 | 4-5 | 5 | 4-5 | 4-5 | 4-5 | 4 | 4-5 | 4 | 3-4 | |
紅PF-6BRed PF-6B | 150 | 4 | 5 | 4-5 | 5 | 5 | 4 | 4 | 4-5 | 3 | 4-5 | |
艷藍PF-3R Brill.Blue PF-3R | 200 | 6 | 5 | 5 | 4 | 4 | 4-5 | 4-5 | 4-5 | 3-4 | 3-4 | |
翠藍PF-GR Turquoise PF-GR | 200 | 6 | 4 | 4-5 | 5 | 5 | 3 | 3 | 4-5 | 3-4 | 3-4 | |
藏青PF-2R ☆Navy Blue PF-2R | 200 | 4-5 | 5 | 5 | 5 | 5 | 4-5 | 4-5 | 4-5 | 3-4 | 4-5 | |
黑PF-SG Black PF-SG | 200 | 6 | 5 | 4-5 | 5 | 5 | 4-5 | 4 | 4-5 | 3-4 | 3 | |
黑PF-N Black PF-N | 200 | 5-6 | 4-5 | 5 | 4-5 | 4-5 | 4 | 4 | 4-5 | 4 | 3-4 | |
黑PF-GR ☆Black PF-GR | 200 | 5-6 | 4-5 | 5 | 4-5 | 4-5 | 4 | 4 | 4-5 | 4 | 3-4 | |
黑PF-DR ☆Black PF-DR | 150 | 6 | 4-5 | 4 | 4-5 | 4-5 | 4 | 4 | 4 | 3 | 4 |
錦得麗PF系列是我司和印花染料,該系列染料具有很高的溶解度、固色率和提升率,以及極佳和色牢度。印花色漿穩定性好,寬容性大,顆粒狀超強的溶解性更適合自動調漿機使用,適合以纖維為主和紡織品印花和連續染色。
染料印花工藝
當使用錦得麗染料印花量,堿劑一般為小蘇打,印制深色時純堿亦可用作堿劑使用。
一、前處理
為達到最佳印花效果。必須加強織物和前處理。除去殘留在纖維內和雜質(如油、蠟質、果膠和其他助劑),發免這些雜質阻礙活性染料和纖維素纖維和反應或給帶來不良影響。
若棉布經光或以不低于22°Be(16%)為濃度的燒堿溶液處理,則織物能獲得最佳的得色量、鮮艷度、勻染性和濕摩擦牢度。可再生纖維素纖維最好在無張力狀態下以6-8°Be(4-5%)燒堿溶液處理。此外,堿前處理可增強布樣尺寸的穩定性,同時也提高了印花后和水洗效果。
二、印花配方
一、儲備漿
400一600克 海澡酸鈉3一12%
50一100克 尿素
40一60克 防染鹽S
1一2克 消泡荊
0.5一1克 防腐荊
15一25克 純堿或
20一30克 小蘇打
x克 水或儲備漿
---------------------------------
1000克
二、印花漿
x克 錦得麗染料
Y克 儲備槳
---------------------------------
1000克
三、固色
1.汽蒸法8一10分鐘,101一103℃(棉,粘膠)
2.焙烘法5分鐘.150℃(棉)
3.高溫汽蒸法6一8分鐘.175℃(滌/棉)
4.焙烘法1分鐘.190一200℃(滌/棉)
四、水洗(軟水)
浸車l水槽→冷水洗→冷水洗→冷水洗→溫水洗(60-70℃)→熱水洗(95℃)→皂洗(95℃,3g/L 皂洗劑)→一熱水洗(80-90℃)→冷水洗→拱干
Kingdery Dyes
When using Kingdery Dyesdyestuffs,it is best to use soda ash as the alkali,sodium bicarbonate
can also be used.
1、Pretreatment of the goods
Careful pretreatment of the woven or knitted fabric is essential to ensure optimum results in reactive
Printing.All impurities in the fibre,lubricants,auxiliaries and processing chemicals that the
printing process must be removed.Maximium colour yield,brilliancy,levelness and wet fastness
properties can only be obtained on cotton if it has been mercerized or at least treated with a caustic
soda solution of at least 220 Be(16%).Regenerated cellulosic fibres should be treated in a
tensionless state with a caustic soda solution of approx. 6一80 Be(4一5%).Alkaline pretreatment
improves additionally dimensional stability and facilitates washing一off of the prints.
2、Printing recipes
Stock thickening
400一600g alginate thickening 3一12%
50一100g Urea
40一60g Reserve salt S
1一2 g Defoamer
0.5一1 g Preservative
15一25g Soda Ash,or
20一30 g Sodium Bicarbonate
X g water or thickening
---------------------------------
1000 g
3、Printing paste
Xg Kingdery Dyes
Yg stock thickening
---------------------------------
1 000g
4、Fixation
1.Steaming 8一10 mins.at 101一103℃(CO.CV}
2.Thermofixation 5mins.at 150℃(CO)
3.11T steam 6一8mins.at 175℃(PESICO)
4.Thermofixation 1 min at 190一200℃(PESICO)
5、 Washing一off
Rinse hot一Rinse warm(60一70℃)一Rinse boil(95℃)一Soaping(95℃,3g/L Soaping agent)一Rinse
boil(80一90℃)一Rinse Cold一Baking